Overview of Internetworking
Prepared by: Dr Sanjeeb Shrestha Moderated by: Dr Sharly J Halder May, 2022
| T1 2022 Assessment 2 Details and Submission Guidelines | |
| Unit Code | MN503 |
| Unit Title | Overview of Internetworking |
| Assessment Type | Group |
| Assessment Title | Network requirement analysis and plan |
| Purpose of the assessment (with ULO Mapping) |
This assignment is designed to assess students’ knowledge and skills related to the following learning outcomes: c. Investigate and develop architectural internetworking design for the business and application domains. d. Analyse and report on the current and future state of the internetworking infrastructure and its applications. e. Implement a process to support the administration and management of internetworking. |
| Weight | 25 % Assignment 2 |
| Total Marks | 60 |
| Word limit | Approximately 600 – 1000 words |
| Due Date | Assignment 2 (Week 11, 31/05/2022) 11:59 PM – submit a report on Moodle |
| Submission Guidelines |
All work must be submitted on Moodle by the due date along with a Title Page. The assignment must be in MS Word format, 1.5 spacing, 11-pt Calibri (Body) font and 2.54 cm margins on all four sides of your page with appropriate section headings. Reference sources must be cited in the text of the report and listed appropriately at the end in a reference list using IEEE referencing style. |
| Extension | If an extension of time to submit work is required, a Special Consideration Application must be submitted directly on AMS. You must submit this application three working days before the due date of the assignment. Further information is available at: https://online.mit.edu.au/ams/PublicDocs/Student/MIT_Special_Consideration_Ap plication.pdf |
| Academic Misconduct |
Academic Misconduct is a serious offence. Depending on the seriousness of the case, penalties can vary from a written warning or zero marks to exclusion from the course or rescinding the degree. Students should make themselves familiar with the full policy and procedure available at http://www.mit.edu.au/about-mit/institute publications/policies-procedures-and-guidelines/Plagiarism-Academic Misconduct-Policy-Procedure. For further information, please refer to the Academic Integrity Section in your Unit Description. |
AssignmentTutorOnline
MN503 Overview of Internetworking P a g e | 2
Prepared by: Dr Sanjeeb Shrestha Moderated by: Dr Sharly J Halder May, 2022
Assignment 1 Overview of Internetworking MN503
A case study entitled “CHICHESTER HIGH SCHOOL Mobility, Flexibility, Reliability Have Finally Arrived” is
uploaded with the assignment folder, and the link for the case study is provided as an appendix.
Based on your understanding of the case study you have already addressed some components such as project
scope and challenges in the Formative assignment 1.
In this assignment 2, you are required to further analyse the case study and design the wired and the wireless
network. Please consider CHICHESTER HIGH SCHOOL has six departments: Admin, Academic, Human Resource
(HR), Finance, IT support and Sports.
This is a group assignment and should be submitted in a group of 4 – 5 students at the maximum.
This assignment consists of two sections. Section 1 – Report preparation and Section 2 – Video
demonstration.
Section 1: In this section, you are required to design the wired and the wireless networks suitable for the
requirement of the case study. You are required to have the following contents.
IP addresses table (suitable for the design)
Network topology design in an appropriate simulation software
Design configuration including
o Switch configuration,
o Router configuration,
o DHCP configuration,
o Access Point (APs) configuration
o Server configuration guidelines
o Security Configuration
o Snapshots of ping connectivity (desirable)
Outcomes
Limitations and future growth
Conclusion
IEEE referencing style
Section 2: This is a video demonstration section where you will prepare a short 7–10-minute video on
your design configuration on a simulation software. You may describe the IP addresses design, network
topology and design configuration (with switch, router, DHCP. APs etc., configurations). It is mandatory
to have your avatar on the screen while describing your design. You may upload the video on the
Moodle Shell or may have the link for the video.
MN503 Overview of Internetworking P a g e | 3
Prepared by: Dr Sanjeeb Shrestha Moderated by: Dr Sharly J Halder May, 2022
Marking criteria:
Example of marking criteria is shown in the following table. Marks are allocated as follows:
| Section needs to be included in the report |
Description of the section | Marks |
| Assignment 2 | ||
| Section 1 | Report Preparation | |
| IP addresses table (suitable for the design) |
Write the IP address table and the Netmask table and the class used. |
10 |
| Network Topology Diagram |
Switch configuration, Router configuration, DHCP configuration, Access Points (APs), Server configuration guidelines, Security Configuration |
12 |
| Outcomes | Identify at least 4 outcomes of the network | 4 |
| Limitations and further growth |
Identify and 2 limitation of the project and your suggestion/s for future |
4 |
| Conclusions | Write a clear conclusion of the case study | 5 |
| Section 2 | Video demonstration on Simulation software | |
| Demonstration | Video demonstration of your network design for 7 – 10 minutes covering the followings: IP addresses design, network topology design configuration (with switch, router, DHCP. APs etc., configurations). |
20 |
| Reference style | Follow IEEE style referencing | 5 |
| Total | 60 |
MN503 Overview of Internetworking P a g e | 4
Prepared by: Dr Sanjeeb Shrestha Moderated by: Dr Sharly J Halder May, 2022
Example Marking Rubric for Assignment #: Total Marks 60
| Grades | Excellent | Very Good | Good | Satisfactory | Unsatisfactory |
| IP addresses table (suitable for the design) |
Concise and specific |
Relevant and soundly analysed |
Generally relevant and analysed |
Some relevance and briefly presented |
This is not relevant to the assignment topic |
| Network Topology Diagram |
Excellent Consistency and convincing |
Topics are relevant and soundly analysed |
Generally relevant and analysed |
Some relevance and briefly presented |
This is not relevant to the assignment topic |
| Outcomes | All elements are present and very well integrated |
Components with good cohesion |
Components presented are mostly well integrated |
Most components are present |
Not adequately presented |
| Limitations | Logic is clear and easy to follow with strong arguments |
Consistent logic and convincing |
Mostly consistent logic and convincing |
Adequate logic and convincing |
Confused and not convincing |
| Conclusions | Excellently summarised and excellently comprehended |
Very good summary and very good comprehension |
Good summary and good comprehension |
Average summary and average comprehension |
Lacks summary and comprehension |
| Demonstrations | Demonstrated excellent ability to think critically and sourced reference materials appropriately |
Demonstrated excellent ability to think critically and but did not sourced reference materials appropriately |
Demonstrated ability to think critically and sourced reference materials appropriately |
Demonstrated ability to think critically and but did not sourced reference materials appropriately |
Did not demonstrated ability to think critically and but did not sourced reference materials appropriately |
| IEEE reference style |
Clear style with excellent references |
Clear referencing style |
Generally good referencing style |
Sometimes clear referencing style |
Lacks consistency with many error |
Appendix:
Case Study source: https://www.commscope.com/globalassets/digizuite/337-167-cs-chichester.pdf.